Cut-to-size, CNC-routed, bent, bonded and polished acrylic parts in clear, coloured, mirrored and frosted PMMA — from a single prototype to ten thousand units, fabricated in our own Foshan workshop and shipped worldwide.
China MDE Plastics Company, provides a variety of high-quality custom acrylic fabrication service, at a very competitive price. We have served a lot of industries as such cosmetic display, holders, POP displays, sign making, construction shield, lighting covers, aquarium, sneeze guard, desk dividers, counter barriers.
- Since 1999
- In-house PMMA supply
- ±0.2 mm CNC tolerance
- 1,000 t annual sheet

Acrylic Fabrication Capabilities
We offer multiple processing methods, including Cut-to-Size, CNC Routing, UV Printing, Screen Printing, Laser Cutting, Line Bending, Edge Polishing, Assembly, Bonding and etc.
Every acrylic part we quote is made under one roof: sheet sourcing and extrusion, cutting, machining, bending, polishing, printing, bonding and export packing. That means one lead time, one quality standard, and nobody to argue with when a tolerance is missed.
Acrylic Cutting and Cut-to-Size
We cut cast and extruded PMMA sheet from 1.5 mm to 50 mm on panel saws, CNC routers and laser cutters — to your exact dimensions, or to a nesting layout that keeps material waste down and your unit price low. Cut-to-size acrylic is available as a standalone service or bundled with sheet supply, and every panel leaves masked, de-burred and edge-chamfered.

CNC Routing and Engraving
Three-axis CNC routing handles profiles, pockets, countersunk holes, threaded inserts, V-grooves and engraved logos in sheet up to 50 mm thick. A routed edge is machined flat and square, so it polishes to optical clarity — and routing is the right process for anything with a radius, an internal cut-out, a tight fit, or a dimension that has to repeat across hundreds of parts.

Laser Cutting
Laser cutting gives a 0.1 mm kerf, a near-polished edge on thin sheet, and no tooling cost — ideal for signage, prototypes, intricate grilles and short runs. We cut cast PMMA up to 20 mm and can combine laser-cut flat parts with line-bent returns in a single order, so you are not stitching two suppliers together.

Edge Polishing and Flame Polishing
A saw-cut edge is matte and slightly grey; a polished edge transmits light like the face does. We sand through successive grits, diamond-polish on a spindle, then flame-polish with a hydrogen torch to erase tool marks and restore transparency. This is the single step that separates a retail-grade acrylic display from a fabricated one.

Line Bending and Heat Bending
Acrylic is heated along a resistance wire or in a strip heater, bent to a controlled radius, then cooled under restraint so the angle holds instead of springing back. We form 90° corners, U-channels, Z-profiles, boxes, plinths and display stands, and can bend 2,440 mm in a single pass. On thick sheet we machine a bend groove first to hold a crisp external radius.

Bonding and Seamless Assembly
We bond with capillary solvent cements for clear joints and two-part acrylic adhesives where strength or dissimilar materials are involved, then grind and flame-polish the seam until it disappears. Seamless bonding is what lets aquarium walls, display cubes, machine guards and counter barriers read as one piece of material rather than a box of panels.

UV Printing and Screen Printing
Acrylic takes ink well — both direct-to-substrate UV printing for full-colour graphics and photographs, and screen printing for solid colours, brand logos and repeat runs. We print second-surface where the graphic has to survive handling, and add a white ink backing layer when an opaque image sits on clear sheet.

Thermoforming and Vacuum Forming
For three-dimensional acrylic — domes, trays, covers, signage faces and light diffusers — we vacuum form over aluminium or fiberglass tools in our own thermoforming workshop. We hold close to 10,000 moulds for repeat geometries. See large vacuum forming service and acrylic vacuum forming.

Acrylic Fabrication Specifications
These are the working limits of our acrylic lines. If your part falls outside one of them, tell us early — we will either propose a different process or explain the constraint before you commit to a drawing.
| Parameter | Capability |
|---|---|
| Sheet thickness | 1.5–50 mm cast PMMA · 1–10 mm extruded PMMA |
| Maximum panel size | 2,440 × 1,220 mm standard · larger by assembly confirm |
| Cutting tolerance | ±0.2 mm CNC routed · ±0.1 mm laser cut |
| Maximum bend length | 2,440 mm in a single pass confirm |
| Bend angle | 0–90° standard · up to 175° on formed profiles |
| Minimum bend radius | 1 × sheet thickness (cast) · 2 × (extruded) |
| Drilling and tapping | M3–M12 · countersunk, counterbored, threaded inserts |
| Edge finish | Sanded · diamond polished · flame polished · chamfered |
| Surface options | Clear · opal · frosted · mirror · textured · coloured · anti-static |
| Drawing formats | DWG · DXF · STEP · IGES · AI · PDF at 1:1 |
| Minimum order | 1 pc prototype · 50 pcs production runs confirm |
| Sample lead time | 5–7 working days after drawing approval confirm |
| Production lead time | 12–20 working days depending on quantity and finish confirm |
| Export packing | PE film · interleaved foam · corner protection · plywood crate |
| Shipping terms | EXW · FOB Shenzhen / Guangzhou · CIF · DDP confirm |
Cast, Extruded or Something Else? Choosing the Right Sheet


Two acrylic sheets that look identical on a sample rack behave very differently under a CNC tool. Choosing correctly at quotation stage is the cheapest quality decision you will make on the project.
Cast PMMA vs Extruded PMMA
Cast acrylic is made by pouring monomer between glass plates. It machines cleanly, resists crazing when drilled or polished, and is the right choice for thick sections, optical parts, aquariums, and anything that will be bonded or flame-polished. Extruded acrylic is cheaper per sheet, holds a tighter thickness tolerance, and is better for thin flat panels, signage and high-volume forming. The working rule: cast for machined and bonded work, extruded for flat and formed work.
Colours, Finishes and Thickness Availability
We supply clear, opal white, black, grey and bronze, plus a broad range of solid and translucent colours, with frosted, matte, mirror, ripple and textile-textured surfaces.
When Polycarbonate, PETG or Polystyrene Is the Better Answer
Acrylic is not always the correct material and we will say so. Polycarbonate absorbs impact that would shatter PMMA — machine guards, security glazing, outdoor barriers. PETG bends cold, bonds with ordinary solvents and suits medical and food-contact fixtures. High-impact polystyrene and ABS cost less, form beautifully and are the sensible choice for opaque housings and display backs. We supply all of them, so the recommendation is not driven by what happens to be on the rack.
How Custom Acrylic Fabrication Works
Six steps, each with a named owner inside the workshop, so you always know where your order stands.
- Send your drawing, sample or reference photo: A DWG, DXF, STEP file or a dimensioned sketch is enough to quote. A physical sample is better if the part has to match an existing assembly.
- Design-for-manufacture review within one working day: Our engineers check wall thickness, bend allowance, minimum hole spacing, material choice and packing, then return a marked-up drawing and the cost drivers — before you pay anything.
- Material and finish sign-off: Sheet type, colour, thickness, edge finish and print method are confirmed against an approved sample or colour chip, in writing.
- Fabrication: Cutting, routing, bending, polishing, printing and bonding run in sequence under a single job card, with an in-process check after each operation.
- Inspection: Dimensional check against the drawing, flatness and squareness measurement, an optical check on transparent parts, and a fit test on every bonded assembly.
- Packing and shipping: Protective film, interleaved foam, edge protection and a plywood crate sized to the pallet. We issue the commercial invoice, packing list and certificate of origin your broker needs.
Tolerances, Finishes and Quality Control
Acrylic is unforgiving. A scratched face or a visible glue line cannot be sanded out after assembly, so quality has to be built into the process rather than inspected at the end.
We inspect at three points. Incoming sheet: thickness, masking integrity, scratches and colour consistency against the approved chip. In-process: first-off approval, bend angle, hole position, edge polish quality. Final: dimensional report against the drawing, flatness and squareness, optical clarity under backlight, and a drop test on the packed carton.



Protective film stays on until the last operation, comes off only for inspection, and goes back on before packing. Flame-polished parts are handled with cotton gloves from the polishing cell onward. Every shipment leaves with a packing list matched to the carton count, and photographs of the packed goods on request.
Acrylic vs Glass vs Polycarbonate
Buyers ask this on almost every first enquiry, so here is the honest comparison — including where acrylic loses.
| Property | Acrylic (PMMA) | Glass | Polycarbonate (PC) |
|---|---|---|---|
| Density | 1.19 g/cm³ — about half the weight of glass | 2.5 g/cm³ | 1.20 g/cm³ |
| Light transmission | 92% | 90–91% | 88% |
| Impact resistance | 10–20× glass at equal thickness | Brittle, shatters | ~250× glass; will not shatter |
| Scratch resistance | Moderate — can be polished out | High | Low — hard-coated grades cost more |
| Maximum service temperature | 70–80 °C | 400 °C+ | 115–130 °C |
| Fabrication | Cuts, routes, bends, bonds and polishes easily | Cut and drilled only; cannot be cold-bent | Machinable but gummy; bending needs heat |
| Relative cost | Low–moderate | Moderate | High |
| Best for | Displays, signage, barriers, aquariums, light covers | Scratch-critical and high-heat surfaces | Machine guards, security glazing, outdoor impact |
Choose acrylic when you need clarity, low weight, easy fabrication and a controlled budget. Choose glass when scratch and heat resistance matter more than weight or impact. Choose polycarbonate when the part has to survive being hit.
Acrylic Fabrication Applications
Most of our acrylic work falls into eight application families. If your project is not listed it is almost certainly still in range — the process does not change, only the drawing does.
Retail display and POP
Counter stands, shelf dividers, cosmetic testers, literature holders and modular display systems.
Architecture and interiors
Counter barriers, desk dividers, balustrade infill, canopies and decorative screens.
Aquariums and marine
Thick-gauge tank walls, viewing windows, sumps and seamless bonded corners pressure-tested before dispatch.
Industrial equipment
Machine guards, inspection windows, equipment covers and safety shields.
Signage and light boxes
Illuminated faces, fabricated lettering, backing panels and edge-lit acrylic signs.
Healthcare and laboratories
Protective sneeze guards, equipment covers, sample racks and cleanable work surfaces.
Lighting
Diffusers, light guides, lenses and LED covers in opal, frosted and prismatic sheet.
Home and furniture
Shelving, table tops, cabinet doors, room dividers and display cases.
Featured Projects
Custom Acrylic Fabrication FAQs
Price is driven by four things: sheet area and thickness, machining time, edge finish and print. A cut-to-size clear panel is priced mostly on material; a polished, bonded and printed display is priced mostly on labour. Send a drawing with quantity and finish and we return an itemised quote — material, machining, finishing, packing — so you can see where the cost sits instead of negotiating one lump number.
One piece for a prototype or sample, and typically 50 pieces for a production run. Cutting, routing, laser cutting and line bending carry no tooling charge, so a single part has no setup penalty. Vacuum forming is the exception: it needs a tool, which we quote separately and keep on file for reorders.
Yes. DWG, DXF, STEP, IGES, AI and 1:1 PDF are all fine, and a dimensioned hand sketch is often enough for a first quote. If you only have a physical sample, send it and we will reverse-engineer the drawing. Please include quantity, sheet thickness, edge finish, colour reference and any tolerance that is critical to assembly.
Single panels up to 2,440 × 1,220 mm are standard. Longer bends, large formed covers and bonded assemblies beyond that size are built by joining — we will tell you exactly where the joint will fall and how visible it will be, so there is no surprise on delivery.
Yes for opaque and translucent colours, either by pigment matching during sheet production or by specifying a mill range. Mirror, frosted and textured finishes are available in a more limited palette. Send a physical chip or Pantone number and we return the closest achievable match with the colour difference noted.
Sampling runs 5–7 working days after drawing approval; production runs 12–20 working days depending on quantity, finishing and print. confirm Sea freight to Europe or North America adds roughly 30–40 days door to door, and air freight is available when a sample is urgent. Dates are confirmed in writing on the quotation, not after the order.
Yes. We use capillary solvent bonding for clear joints and two-part adhesives where strength or dissimilar materials matter, then grind and flame-polish the joint. A well-made bond reads as a single piece of material from 300 mm away. Aquariums and load-bearing assemblies get a reinforced corner detail and a pressure test before shipping.
Both faces stay masked, panels are interleaved with foam or tissue, edges get corner protection, and the load goes into a plywood crate or a fully crated pallet — never a bare carton. We photograph the packed goods before dispatch and can supply fumigation-free plywood packaging for Australian and US import requirements.
Yes. For repeat geometries we produce a pre-production sample on the same process and material as the bulk order, and you approve it in writing before we run. For new designs, a single-unit prototype is quoted at piece price with no tooling charge on cut, routed, laser-cut and bent parts.



